| ascii File), a dialog box is displayed prompting you to enter an |
| optional description of the file. If a description is entered, that text |
| is displayed in this field. If no description is entered, the |
| Description field is blank. |
|
|
|
| . Total Production Time: This is the total amount of time that the |
| machine has been in production mode since it was last powered up. |
| This time is reset to zero when the machine is powered down. |
| . Total Setup Time: This is the total amount of time that the |
| machine has been in setup mode since it was last powered up. This |
| time is reset to zero when the machine is powered down. |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| . Total Idle Time: This is the total amount of time that the machine |
| has been in idle mode since it was last powered up. This time is reset |
| to zero when the machine is powered down. |
|
|
| . Total Diagnostic Time: This is the total amount of time that the |
| machine has been in diagnostic mode since it was last powered up. |
| This time is reset to zero when the machine is powered down. |
| . Machine On Time: This is the total amount of time since the |
| machine was last powered up. This time is reset to zero when the |
| machine is powered down. |
|
|
|
|
| select Exit to close the Information window. |
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
|
|
|
|
|
|
|
| Page 3 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Information 46409102 Rev. - |
|
|
|
| DOCUMENT CHANGES INFORMATION |
|
|
|
| Changes To This Revision |
|
|
|
|
| Not applicable. New document release. |
|
|
|
|
|
|
|
|
|
| Page 1 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Graph for Component 46444402 Rev. A |
|
|
| Introduction |
|
|
|
|
|
| Type |
|
|
|
|
|
|
| Use the Graph for Component window to display component data by component |
| ID in graphic format. Data can be displayed in pie chart (shown above) |
| or bar chart format. The selected component is designated in the title bar of |
| the graph window. |
|
|
|
|
| To open the Graph for Component window: |
|
|
| 1. From the Component Data window, select: |
|
|
| Options > Graph |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| When displayed, the Graph for Component window occupies a portion |
| of the Management Information window. |
|
|
| The Window |
|
|
|
|
|
| A key to the graph is provided in an information block in the window. |
| There are two options in the Component Data Graph window, Type and Options. |
| Use the Type menu bar heading to view component data by component ID in |
| pie chart (default) or bar chart format. A checkmark visible in front of the |
| menu option indicates the format selected. |
|
|
|
|
|
|
|
|
|
| Page 2 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| TECHNICALP UBLICATIONS |
|
|
|
|
| 46444402 Rev. A Graph for Component |
|
|
| Pie Chart |
|
|
|
|
|
| When the Component Data Graph window is initially displayed, component |
| data is displayed in pie chart format as shown at the beginning of this module. |
| Bar Chart |
|
|
|
|
|
| If the Bar Chart menu option is selected, component data is displayed in the |
| bar chart format as follows. |
|
|
|
| Options |
|
|
|
|
|
|
| Use the Options menu bar heading to print the graph displayed on the screen. |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Print |
|
|
|
|
|
|
| Use the Print menu option to send the current graph to the default printer. |
| Exit |
|
|
|
|
|
|
| select Exit to close the Component Data Graph window and return to the |
| Component Data window. |
|
|
|
|
|
|
|
|
|
|
|
| Page 3 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Graph for Component 46444402 Rev. A |
|
|
| DOCUMENT CHANGES INFORMATION |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Changes To This Revision |
|
|
|
|
| update to rev. A. |
|
|
|
|
| Pg 1: Updated illustration. |
|
|
|
|
|
|
|
|
|
|
| Graph For |
|
|
|
|
|
| Component |
|
|
|
|
|
| 46444403 |
|
|
|
|
|
|
| Rev. |
|
|
|
|
|
|
| 11-00tln |
|
|
|
|
|
|
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Graph For Component 46444403 Rev. This |
|
|
| Document Supports IM-UPS 2.5.x and Above |
|
|
| Table of Contents |
|
|
|
|
| Introduction .................................................................................................................................................................. 1 |
| The Window ....................................................................................................................................................... 1 |
| Type .............................................................................................................................................................................. 1 |
| Pie Chart ............................................................................................................................................................. 1 |
| Bar Chart ............................................................................................................................................................. 2 |
| Options ......................................................................................................................................................................... 2 |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| View Legend ....................................................................................................................................................... 2 |
| Print ..................................................................................................................................................................... 2 |
| Exit ............................................................................................................................................................................... 2 |
| Changes To This Revision ........................................................................................................................................... 3 |
|
|
|
|
|
|
|
| Page 1 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Graph For Component 46444403 Rev. This |
|
|
| Document Supports IM-UPS 2.5.x and Above |
|
|
| Introduction |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Use the Graph for Component window to display component data by |
| component ID in graphic format. Data can be displayed in pie chart (shown |
| above) or bar chart format. The selected component is designated in the title |
| bar of the graph window. |
|
|
|
|
| To open the Graph for Component window: |
|
|
| 1. From the Component Data window, select: |
|
|
| Options > Graph |
|
|
|
|
|
| When displayed, the Graph for Component window occupies a portion |
| of the Management Information window. |
|
|
| The Window |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| A legend for the graph is provided in an information block in the window. |
| The legend items are color coded and numbered so that component data can |
| be easily identified if printed in color or black and white. |
| Type |
|
|
|
|
|
|
| Use the Type menu bar heading to view component data by component ID in |
| pie chart (default) or bar chart format. A checkmark visible in front of the |
| menu option indicates the format selected. |
|
|
| Pie Chart |
|
|
|
|
|
| select Pie Chart to display the selected component data in pie chart format |
| as shown at the beginning of this module. |
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
|
|
|
|
|
|
|
| Page 2 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| 46444403 Rev. Graph |
|
|
|
|
| For Component |
|
|
|
|
|
| This Document Supports IM-UPS 2.5.x and Above |
|
| Bar Chart |
|
|
|
|
|
| select Bar Chart to display selected component data in bar chart format. |
| Options |
|
|
|
|
|
|
| Use the Options menu bar heading to select graph options. |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| View Legend |
|
|
|
|
|
| select View Legend to hide the graph legend from the screen. Use this |
| feature if the legend covers data. A bullet to the left of the View Legend |
| menu item indicates the legend is visible. |
|
|
| Print |
|
|
|
|
|
|
| select Print to send the current graph to the default printer. |
| Exit |
|
|
|
|
|
|
| select Exit to close the Component Data Graph window and return to the |
| Component Data window. |
|
|
|
|
|
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Page 3 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Graph For Component 46444403 Rev. This |
|
|
| Document Supports IM-UPS 2.5.x and Above |
|
|
| Changes To This Revision |
|
|
|
|
| New part number. |
|
|
|
|
|
| Pg 2: Added the View Legend topic. |
|
|
|
| New screen images. |
|
|
|
|
|
|
|
|
|
|
|
| Page 1 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Transfer Assembly T46476101 Rev.A |
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
|
|
|
|
|
|
|
| Page 2 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| T46476101 Rev.A Transfer Assembly |
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
| 16 |
|
|
|
|
|
|
| (4) 43(4) 32 1 |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 11 |
|
|
|
|
|
|
| (8)12 |
|
|
|
|
|
|
| 13 |
|
|
|
|
|
|
| (4)39 5 |
|
|
|
|
|
|
| 18 |
|
|
|
|
|
|
| 16 |
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
| 17 |
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
| DETAIL -A |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| DETAIL-A |
|
|
|
|
|
|
|
|
|
|
|
|
| Page 3 |
|
|
|
|
|
|
| Transfer Assembly T46476101 Rev.A |
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
| DETAIL - B |
|
|
|
|
|
| DETAIL - C |
|
|
|
|
|
| 15 (4) |
|
|
|
|
|
|
| 8 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 21 |
|
|
|
|
|
|
| 21 5 |
|
|
|
|
|
|
| 5 |
|
|
|
|
|
|
| DETAIL-C |
|
|
|
|
|
| 42 |
|
|
|
|
|
|
| 45 |
|
|
|
|
|
|
| 47 |
|
|
|
|
|
|
| 7 |
|
|
|
|
|
|
| 10 |
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 4 |
|
|
|
|
|
|
| 6 |
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
| 48 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
| 8 |
|
|
|
|
|
|
| 6 3 |
|
|
|
|
|
|
| 2 |
|
|
|
|
|
|
| 31 (4) 1 41 |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 9 |
|
|
|
|
|
|
| 3 40 |
|
|
|
|
|
|
| 5 5 |
|
|
|
|
|
|
| 37 (8) |
|
|
|
|
|
|
| 44 (8) |
|
|
|
|
|
|
| (8) 46 |
|
|
|
|
|
|
| (4) 14 |
|
|
|
|
|
|
| (8) 38 |
|
|
|
|
|
|
| (6) 20 |
|
|
|
|
|
|
| DETAIL-B |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 31 (4) |
|
|
|
|
|
|
| 42 |
|
|
|
|
|
|
| 45 |
|
|
|
|
|
|
| 47 |
|
|
|
|
|
|
| 9 |
|
|
|
|
|
|
| 40 3 |
|
|
|
|
|
|
| 41 |
|
|
|
|
|
|
| 10 |
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
| 5 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 8 |
|
|
|
|
|
|
| 6 3 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 48 |
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
| 24 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 6 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Page 4 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| T46476101 Rev.A Transfer Assembly |
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
| 26 |
|
|
|
|
|
|
| 35 (5) |
|
|
|
|
|
|
| 44 (5) |
|
|
|
|
|
|
| (2) 2 |
|
|
|
|
|
|
| (9) 35 |
|
|
|
|
|
|
| (9) 44 |
|
|
|
|
|
|
| 25 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| (6) 44 |
|
|
|
|
|
|
| (6) 35 |
|
|
|
|
|
|
| (2) 36 |
|
|
|
|
|
|
| (2) 44 |
|
|
|
|
|
|
| (2) 49 |
|
|
|
|
|
|
| (20) 34 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 30 |
|
|
|
|
|
|
| 28 |
|
|
|
|
|
|
| (2) 22 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| (2) 29 |
|
|
|
|
|
|
| 35 (4) |
|
|
|
|
|
|
| 44 (4) |
|
|
|
|
|
|
| 46 (4) |
|
|
|
|
|
|
| 27 (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Page 5 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Transfer Assembly T46476101 Rev.A |
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
|
|
|
|
|
|
|
| Page 6 |
|
|
|
|
|
|
| T46476101 Rev.A Transfer Assembly |
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
|
|
|
|
|
|
|
| Page 7 |
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Transfer Assembly T46476101 Rev.A |
|
|
|
| This Document Supports Assembly 46476101 Rev. A |
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Changes To This Revision |
|
|
|
|
| Restructure drawing to tech pubs format. |
|
|
|
|
|
|
|
|
|
| Page 1 |
|
|
|
|
|
|
| Transfer Assembly T46476102 Rev. C |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| Assembly Drawings |
|
|
|
|
|
|
|
|
|
|
|
|
| Page 2 |
|
|
|
|
|
|
| T46476102 Rev. C Transfer Assembly |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| This Document Supports Assembly 46476102 Rev. C |
|
| 16 |
|
|
|
|
|
|
| (4) 43 |
|
|
|
|
|
|
| (4) 321 |
|
|
|
|
|
|
| 11 |
|
|
|
|
|
|
| (8)12 |
|
|
|
|
|
|
| 13 |
|
|
|
|
|
|
| (4)39 5 |
|
|
|
|
|
|
| 18 |
|
|
|
|
|
|
| 16 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 19 |
|
|
|
|
|
|
| 17 |
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
| DETAIL -A |
|
|
|
|
|
| DETAIL-A |
|
|
|
|
|
| Page 2T46476102 Rev. C Transfer Assembly |
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| 16 |
|
|
|
|
|
|
| (4) 43 |
|
|
|
|
|
|
| (4) 321 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 11 |
|
|
|
|
|
|
| (8)12 |
|
|
|
|
|
|
| 13 |
|
|
|
|
|
|
| (4)39 5 |
|
|
|
|
|
|
| 18 |
|
|
|
|
|
|
| 16 |
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
| 17 |
|
|
|
|
|
|
| 19 |
|
|
|
|
|
|
| DETAIL -A |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| DETAIL-A |
|
|
|
|
|
|
|
|
|
|
|
|
| Page 3 |
|
|
|
|
|
|
| Transfer Assembly T46476102 Rev. C |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| DETAIL - B |
|
|
|
|
|
| DETAIL - C |
|
|
|
|
|
| 15 (4) |
|
|
|
|
|
|
| 8 21 |
|
|
|
|
|
|
| 21 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 4 |
|
|
|
|
|
|
| DETAIL-C |
|
|
|
|
|
| 42 |
|
|
|
|
|
|
| 45 |
|
|
|
|
|
|
| 47 |
|
|
|
|
|
|
| 7 |
|
|
|
|
|
|
| 10 |
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
| 6 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 33 |
|
|
|
|
|
|
| 48 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 23 |
|
|
|
|
|
|
| 8 |
|
|
|
|
|
|
| 6 3 |
|
|
|
|
|
|
| 2 |
|
|
|
|
|
|
| 31 (4) 1 41 |
|
|
|
|
|
| 9 |
|
|
|
|
|
|
| 3 40 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 4 |
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
| 37 (8) |
|
|
|
|
|
|
| 44 (10) |
|
|
|
|
|
|
| (8) 46 |
|
|
|
|
|
|
| (4) 14 |
|
|
|
|
|
|
| (8) 38 |
|
|
|
|
|
|
| (6) 20 |
|
|
|
|
|
|
| DETAIL-B |
|
|
|
|
|
| 31 (4) |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 42 |
|
|
|
|
|
|
| 45 |
|
|
|
|
|
|
| 47 |
|
|
|
|
|
|
| 9 |
|
|
|
|
|
|
| 40 3 |
|
|
|
|
|
|
| 41 |
|
|
|
|
|
|
| 10 |
|
|
|
|
|
|
| 3 |
|
|
|
|
|
|
| 5 |
|
|
|
|
|
|
| 8 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 6 3 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 48 |
|
|
|
|
|
|
| 33 |
|
|
|
|
|
|
| 24 |
|
|
|
|
|
|
| 1 |
|
|
|
|
|
|
| 6 4 |
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
| 4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Page 4 |
|
|
|
|
|
|
| T46476102 Rev. C Transfer Assembly |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| 26 |
|
|
|
|
|
|
| 28 (5) |
|
|
|
|
|
|
| 30 (5) |
|
|
|
|
|
|
| (2) 2 |
|
|
|
|
|
|
| (9) 28 |
|
|
|
|
|
|
| (9) 30 |
|
|
|
|
|
|
| 25 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| (6) 30 |
|
|
|
|
|
|
| (6) 28 |
|
|
|
|
|
|
| (2) 36 |
|
|
|
|
|
|
| (2) 44 |
|
|
|
|
|
|
| (2) 49 |
|
|
|
|
|
|
| (2) 22 |
|
|
|
|
|
|
| (2) 29 |
|
|
|
|
|
|
| 35 (4) |
|
|
|
|
|
|
| 44 (4) |
|
|
|
|
|
|
| 46 (4) |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 27 (2) |
|
|
|
|
|
|
| 50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Page 5 |
|
|
|
|
|
|
| Transfer Assembly T46476102 Rev. C |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
|
|
|
|
|
|
|
| Page 6 |
|
|
|
|
|
|
| T46476102 Rev. C Transfer Assembly |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Notes |
|
|
|
|
|
|
| 1 APPLY LOCTITE #222 (40830705) AT ASSEMBLY. |
|
| 2 RETAINING RING IS NOT REQUIRED ON THIS SIDE. |
|
| 3 INSERT LOOP OF SPRING 44950902 INTO HOLE OF END CAP 46268901 AND 46289001 |
| AND PRESS SPRING PIN 80014009 ASSURING THAT THE SPRING PIN GOES THROUGH |
| THE LOOP OF THE SPRING. |
|
|
|
|
| 4 ASSEMBLE CLAMPS (46389903) IN THESE LOCATIONS, FOR A RIGHT TO LEFT |
| TRANSFER. THE TWO CLAMPS (46389904) SHOULD BE ASSEMBLED ON THE SAME END |
| OF THE MACHINE AS THE BAD BOARD HOPPER. |
|
|
| 5 ASSEMBLE SET SCREWS INTO THE FOUR LOCK BLOCKS THAT ARE ON THE NONJUSTIFIED |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| EDGE. THE JUSTIFIED EDGE IS THE EDGE OF THE PC BOARD THAT REMAINS |
| IN THE SAME POSITION AS THE LENGTH OF THE PC BOARD CHANGES. |
| 6 APPLY LOCTITE #222 (40830705) TO BUMPER (41340102) AT ASSEMBLY. |
| 7 APPLY LOCTITE #545 (40830717) AT ASSEMBLY. |
|
| 8 SLIP LOOP OF SPRING OVER “T” SHAPED BRACKETS (46475601 AND 46475701). |
|
|
|
|
|
|
|
| Page 7 |
|
|
|
|
|
|
| Transfer Assembly T46476102 Rev. C |
|
|
|
| Bill Of Materials |
|
|
|
|
| DET |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| NO. |
|
|
|
|
|
|
| ITEM NO. DESCRIPTION QTY U/M |
|
|
|
| 1 10463023 SHOULDER SCREW 2 EA |
|
|
|
| 2 16794001 LABEL,SAFETY 2 EA |
|
|
|
| 3 30910441 SPACER 2 EA |
|
|
|
|
| 4 41340102 BUMPER 2 EA |
|
|
|
|
| 5 41954404 RING, RETAINING 1 EA |
|
|
|
| 6 44950902 SPRING, EXTENSION 2 EA |
|
|
|
| 7 46268901 END CAP, LH 1 EA |
|
|
|
| 8 46269001 END CAP, RH 1 EA |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 9 46269101 ROLLER 2 EA |
|
|
|
|
| 10 46269201 BEARING, RADIAL 2 EA |
|
|
|
| 11 46269401 TRANSFER TUBE, MACHINED 1 EA |
|
|
| 12 46269601 BLOCK, LOCK 8 EA |
|
|
|
| 13 46269701 ROD, CONNECTING 1 EA |
|
|
|
| 14 46313101 CLAMP, BOARD 4 EA |
|
|
|
| 15 46313201 CLAMP, BOARD 4 EA |
|
|
|
| 16 46335901 BLOCK, END 2 EA |
|
|
|
| 17 46336001 PIN, BEARING 1 EA |
|
|
|
| 18 46336101 BLOCK, BEARING 1 EA |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 19 46366801 BUSHING, DU 2 EA |
|
|
|
| 20 46389903 CLAMP, LOCK BLOCK 6 EA |
|
|
|
| 21 46389904 CLAMP, LOCK BLOCK 2 EA |
|
|
|
| 22 46475401 WASHER, SPHERICAL 2 EA |
|
|
|
| 23 46475601 BRACKET, LH 1 EA |
|
|
|
| 24 46475701 BRACKET, RH 1 EA |
|
|
|
| 25 46475802 BRACKET, ANGLE 1 EA |
|
|
|
| 26 46475901 BRACKET 1 EA |
|
|
|
|
| 27 46527101 PLATE, NUT 2 EA |
|
|
|
| 28 80027104 MSHCS M6X 16MM 18 EA |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 29 46527301 PLATE 2 EA |
|
|
|
|
| 30 80055609 MSLW M6 18 EA |
|
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
|
|
|
|
|
|
|
| Page 8 |
|
|
|
|
|
|
| T46476102 Rev. C Transfer Assembly |
|
|
|
| 31 80000404 SHCS 8-32 X 5/8 8 EA |
|
|
|
| 32 80000501 SHCS 10-24 X 3/8 4 EA |
|
|
|
| 33 80000521 SHCS 10-32 X 1 1/2 2 EA |
|
|
| 35 80000604 SHCS 1/4-20 X 5/8 6 EA |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 36 80000609 SHCS 1/4-20 X 1 1/2 2 EA |
|
|
| 37 80001702 SBHS 1/4-20 X 1/2 8 EA |
|
|
|
| 38 80002702 SFHS 1/4-20 X 1/2 8 EA |
|
|
|
| 39 80003902 SSSCPP 1/4-20 X 1/4 4 EA |
|
|
| 40 80014009 SPRG PIN .094 X .750 2 EA |
|
|
| 41 80014108 SPRG PIN .125 X .750 2 EA |
|
|
| 42 80015103 HEX JAM NUT 5/16-18 2 EA |
|
|
| 43 80018705 SLW #10 4 EA |
|
|
|
|
| 44 80018706 SLW 1/4 16 EA |
|
|
|
|
| 45 80018707 SLW 5/16 2 EA |
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| 46 80018807 FW 1/4 12 EA |
|
|
|
|
| 47 80018809 FW 5/16 2 EA |
|
|
|
|
| 48 80023508 HEX NUT-MS 10-32 2 EA |
|
|
|
| 49 BLKM07193 WASHER, SPHERICAL 2 EA |
|
|
| 50 49809301 CYLINDER, RODLESS AIR 1 EA |
|
|
| USED BUT NOT SHOWN ITEMS |
|
|
|
|
| 51 T46476102 DOC, TRANSFER ASSY 1 EA |
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
|
|
|
|
|
|
|
| Page 9 |
|
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Transfer Assembly T46476102 Rev. C |
|
|
|
| This Document Supports Assembly 46476102 Rev. C |
|
| Changes To This Revision |
|
|
|
|
| Page 3 - Removed (4) Note 5 callouts. Added (5) Note 4 callouts. |
| Page 4 - Removed callout of detail number 35 and replaced it with detail number 28 (3 |
| places). Removed callout of detail number 44 and replaced it with detail number 30 (3 |
| places). Updated view of the rodless air cylinder. Removed unnecessary hardware that |
| was still shown and associated callouts. |
|
|
| Page 6 - Updated note 2. Changed the first 46389902 to 46389903. Changed the |
| second 46389902 to 46389904. |
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
|
|
|
|
|
|
|
| Safety Related Safety Related Safety Related Safety Related Safety Related |
| Information Information Information Information Information |
| Safety Related |
|
|
|
|
|
| Information |
|
|
|
|
|
| 46560201 Rev. D |
|
|
|
|
|
| 05-02 jja,cw,djh |
|
|
|
|
|
|
|
|
|
|
|
|
| TECHNICAL PUBLICATIONS |
|
|
|
|
| Safety Related Information 46560201 Rev. D |
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Table of Contents |
|
|
|
|
| Introduction .................................................................................................................................................................. 1 |
| Icon Definitions ............................................................................................................................................................ 1 |
| Lubricant, Adhesive, and Torque Icons ............................................................................................................... 1 |
| Current Warning, Caution and Note Icons .......................................................................................................... 1 |
| Previous Warning, Caution and Note Icons ........................................................................................................ 2 |
| Color Codes .................................................................................................................................................................. 3 |
| Safety Labels ................................................................................................................................................................ 3 |
| Classifications of Electrical Work ................................................................................................................................ 5 |
| General Safety Rules .................................................................................................................................................... 5 |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| Insertion Mount (IM) Safety Rules ...................................................................................................................... 6 |
| Powering Down the Machine in an Emergency ............................................................................................................ 6 |
| Changes To This Revision............................................................................................................................................ 8 |
|
|
|
|
|
|
|
| Page 1 |
|
|
|
|
|
|
| Safety Related Information 46560201 Rev. D |
|
|
| Introduction |
|
|
|
|
|
| All Caution and Warning notices posted on the machine and used in this |
| document must be followed for the safety of personnel and the protection of |
| equipment. |
|
|
|
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| CAUTION Do not perform any mechanical or electrical changes to the machine |
| without official authorization or documentation from Universal |
| Instruments Corporation. Failure to comply with this guideline may |
| adversely impact the warranty status of the machine. |
|
| Icon Definitions |
|
|
|
|
|
| The following list defines icons that are used in Universal Instruments |
| maintenance documentation. If a procedure requires a lubricant, adhesive, or |
| torque, refer to the Assembly Drawings section of the document to identify |
| the specific item or torque. |
|
|
|
| Lubricant, Adhesive, and Torque Icons |
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| The Lubricant Icon indicates that a lubricant is needed for an assembly. Use |
| the icon number to locate the lubricant description in the Prerequisite |
| Information and Introduction document.xx |
|
|
| If a lubricant must be replenished at regular intervals, the Maintenance |
| Concept in a document names the procedure and interval. |
| xxx |
|
|
|
|
|
|
| The Adhesive Icon indicates that an adhesive is needed for an assembly. |
| Apply the adhesive to the specified part/location prior to assembly. Use the |
| icon number to locate the lubricant description in the Prerequisite |
| Information and Introduction document. |
|
|
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| The Torque icon specifies the torque required for a particular screw. Torques |
| are usually specified in units of inch-ounces, inch-pounds, or foot-pounds.xx IN-LB |
| xx NM |
|
|
|
|
|
|
| Current Warning, Caution and Note Icons |
|
|
| The warning, caution and note icon designs (and colors) have recently |
| changed to comply with the SEMI S13 standard. Below are the latest |
| warning, caution and note icons. |
|
|
|
| WARNING This orange and black lockout/warning icon indicates that: |
| . The machine must be powered down and |
|
|
| . The local Lockout/Tagout procedure must be performed to ensure |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| personal safety during a procedure. |
|
|
|
|
|
|
|
|
|
| Page 2 |
|
|
|
|
|
|
| 46560201 Rev. D Safety Related Information |
|
|
| WARNING |
|
|
|
|
|
|
| CAUTION |
|
|
|
|
|
|
| NOTE |
|
|
|
|
|
|
| Warning icons indicate a potentially hazardous situation which, if not |
| avoided, could result in serious injury. They are orange and black. |
| Yellow and black Caution icons indicate a potentially hazardous |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|
| situation which, if not avoided, may result in minor or moderate injury. |
| It may also be used to alert against unsafe practices that may cause |
| property (equipment or data) damage. |
|
|
| The blue note icon is used to highlight specific information. The |
| information in a Note is not safety related. |
|
| Previous Warning, Caution and Note Icons |
|
|
| Below are the warning, caution and note icons which still exist in Universal |
| Instruments documentation that was released prior to the design changes. |
| Refer to the previous section to compare these with the newer designs. |
| This red and black lockout/warning icon indicates that the machine |
| Email:smt@smtsky.com,Website:www.smtsky.com |
|